Beyond Steel
Beyond Steel
A 350 Plate Supplier in India is typically sought when a project requires a steel plate with higher specified strength than conventional structural grades. Ironmart Private Limited , headquartered in Raipur, Chhattisgarh, supplies 350-grade and other higher-strength steel plates for construction, fabrication, infrastructure, engineering, manufacturing and industrial applications. From 423/70, Guma Nandanwan Road, near R Logistics Park, Raipur , Ironmart serves Raipur, Bhilai, Durg, Rajnandgaon, Dhamtari and customers across 25+ cities in India
Its steel portfolio includes Special Grade Plates, High Tensile Plates, HR Plates, MS Plates, PM Plates and Chequered Plates , supported by sourcing, inventory, logistics, weighing and cut-to-length capabilities. Ironmart states 5,000+ tons of live inventory, 10,000+ tons/month throughput capacity, 1,000+ completed projects and 2.5 lakh tons supplied in 3.5 years .
Strong Systems. Honest Trade. Reliable Supply.
The term '350 Plate' is commonly used in the market to describe steel associated with a 350 MPa-class yield-strength designation. However, '350' alone does not constitute a complete material specification. For example, IS 2062 E350 is a defined structural steel grade, with its mechanical requirements varying with thickness and applicable quality designation.
For procurement, the buyer should therefore establish the complete grade, standard, thickness, dimensions, mechanical properties, delivery condition and certification requirements before comparing quotations.
Ironmart follows a specification-led sourcing approach and works with established steel producers including SAIL, Jindal Steel, RINL-VSP and Bhushan Power & Steel, along with other reputed sources.
| Particular | Details |
|---|---|
| Company | Ironmart Private Limited |
| Established | 2022 |
| Founder & Director | Ritesh Agrawal |
| Headquarters | Raipur, Chhattisgarh |
| Stated Live Inventory | 5,000+ tons |
| Monthly Throughput | 10,000+ tons |
| Projects Completed | 1,000+ |
| Steel Supplied | 2.5 lakh tons in 3.5 years |
| Supply Reach | 25+ cities |
| Stated Clients | 50+ |
| Stated Repeat Business | 70% |
For Indian structural applications, IS 2062 E350 is an important reference specification. The 'E350' designation corresponds to a minimum yield-strength class of 350 MPa for specified thickness ranges , while the applicable tensile strength, elongation, impact requirements and other properties must be checked against the relevant grade and quality designation.
| Parameter | Technical Requirement |
|---|---|
| Product | 350-grade structural steel plate |
| Common Indian Specification | IS 2062 |
| Example Grade | E350 |
| Yield Strength | 350 MPa minimum for applicable thickness range |
| Tensile Strength | Grade/specification dependent |
| Elongation | Grade/specification dependent |
| Thickness | As specified |
| Width | As specified |
| Length | As specified |
| Form | Flat hot-rolled steel plate |
| Surface | Mill finish / as specified |
| Delivery Condition | As specified by grade and order |
| Impact Requirement | Where specified by quality designation |
| Documentation | MTC / inspection documentation, where required |
| Processing | Cut-to-length, subject to capability |
Important: Mechanical properties can change with plate thickness and the applicable quality designation. The purchase order should therefore reference the complete material specification rather than simply stating '350 plates.'
For buyers searching specifically for 350 Plate Suppliers in India , IS 2062 E350 is one of the most relevant designations to understand.
| Factor | E350 Consideration |
|---|---|
| Steel category | Medium/high-tensile structural steel |
| Designated yield strength | 350 MPa class |
| Typical use | Structural and fabricated applications |
| Thickness effect | Yield requirement varies with thickness |
| Quality designation | Selected according to impact/testing requirement |
| Certification | MTC should correspond to ordered grade |
| Procurement basis | Grade + standard + dimensions + quality requirements |
The distinction matters because a plate described commercially as '350' may not automatically satisfy the same requirements as an IS 2062 E350 plate.
A technically complete enquiry should contain:
This gives the supplier a technically complete basis for sourcing and quotation.
Strength is only one part of material selection. For fabrication and structural applications, engineers may also need to consider tensile strength, elongation, impact toughness, weldability, dimensional tolerances and delivery condition.
For example, published references for IS 2062 E350 identify a minimum yield strength of 350 MPa for plates up to the applicable thickness threshold, with tensile strength and other properties defined separately by the standard.
Therefore, selecting an E350 plate should not be based solely on the number '350'. The complete certified properties must correspond to the engineering specification.
350-grade plates can be selected where the design calls for higher specified structural strength and suitable fabrication characteristics.
Actual suitability depends on the design, fabrication procedure and complete material specification.
For a higher-strength plate, quality assurance should connect the material supplied to the material ordered .
The procurement review should include:
Ironmart's stated quality framework is built around Quality, Reliability, Integrity, Partnership and Performance, with certification and quality resources forming part of its broader steel-supply infrastructure.
For project-controlled procurement, the MTC should be checked against the grade, heat number, dimensions and relevant test results specified in the purchase documentation.
There is no technically meaningful fixed price for every 350 plate. The final rate can vary according to:
For this reason, a proper quotation should be requested against the complete technical specification, rather than comparing ₹/kg prices for vaguely described '350 plates.'
Ironmart supplies steel for requirements across:
Selected Clients
For a precise quotation, share the complete grade, applicable standard, thickness, width, length, quantity, quality documentation and delivery requirement with Ironmart.
Ironmart Private Limited — Strong Systems. Honest Trade. Reliable Supply.
Loading states...